Antirock Sway Bar Kit, Universal, 40 in. Bar, 20 in. Steel Arms
RockJock's Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 39 1/2 in. torsion bar length and 20 in. long fabricated steel arms. Vertical links use a 14 in. long 1/2 in. x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2 in. x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75 in. x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the delrin bushings to support the bar in the tube. The 39 1/2 in. bar is a 1 in. diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
We Also Recommend
RockNut 21-Up Bronco Billet Aluminum Johnny Joint Rear Lower Control Arm Set, Double Adjustable
RockNut 21-Up Bronco Billet Aluminum Johnny Joint Rear Upper Control Arm Set, Double Adjustable