Toyota Land Cruiser 200 series 08-21 Rear Bump Stops 3.75 Inch tall - No Lift Required - DBR375
Durobumps Premium Toyota Land Cruiser 200 Series Off Road Bump Stops 2008-2021 (3.75? Tall) No Lift Required. DBR375
DuroBumps Premium Off-Road Bump Stops, proudly made in the USA! Designed with patent-pending dual durometer rubber that provides smooth, progressive dampening. This greatly reduces hard bottom-outs, and increases control and comfort, unlike OEM bump stops that feel rock-hard on contact. DuroBumps improves off-road control and comfort, and eliminates the “shell-shock” effect when hitting larger bumps. Our frame mounted bump stops greatly reduce or eliminate hard impacts associated with bottoming out shocks and suspensions. They absorb shock loads, increasing maintenance intervals, and reduce wear on critical suspension components. Upgrade your LC200 bump stops with our premium off-road bump stops and experience the Durobumps difference.
DBR375 off road bump stops are a great suspension upgrade for your LC200. They are quickly and easily installed with basic hand tools and provided hardware. Once installed, Durobumps will protect your shocks from over compression and bottoming out. Which can damage or destroy your your trucks shocks and other suspension components, both on and off the trail. By absorbing shock loads they also increase maintenance intervals therefore reducing wear on suspension components. Our Toyota Land Cruiser 200 rear Durobumps are designed to be slightly taller than the OEM bump stops and compress under load providing smooth, progressive dampening that will not limit wheel up travel.
Don’t settle for poor suspension performance. Choose DuroBumps Land Cruiser 200 series suspension upgrades for your truck today and experience the DuroBumps difference – order now! Note: For off-road use only. Do not use spacers with any of Durobumps product line. By installing these aftermarket bump stops, the user assumes all risk and liability. DuroBumps are not designed for towing applications. For more information, visit https://durobumps.com/terms-of-use/. The seller will not be held liable for any damage or loss associated with the installation or use of this product for any reason.
LC200 Rear Bump Stops DBR375 Features and Benefits
- Improved handling – Dual durometer rubber allows DuroBumps to act as a secondary coil spring, with smooth engagement that progressively increases compression load in a predictable fashion.
- Mounts in OEM location – Easily bolts into the OEM location to ensure a proper fit—no modifications needed.
- Increased suspension life – Greatly extends the life of your trucks suspension components by absorbing the shock load when the suspension bottoms out. By absorb the impact Durobumps saves your critical suspension components from excessive wear and service intervals.
- Small, compact, application-specific – Designed to fit specific truck models. No “universal fit” spacers are required.
- Silent engagement – Unlike Hydro bumps, DuroBumps are whisper quiet on contact.
- Premium bump stops – DuroBumps are proudly made in the USA from the highest quality raw materials.
- Provided mounting hardware – JIS 10.9 zinc-coated hex head metric bolts and single-use thread locker are provided with every set of DuroBumps, ensuring a strong, secure fit.
What's Included:
(2) Two rear DuroBumps
(4) Four JIS 10.9 M8-1.25 40mm flange bolts with pre-applied thread locker
(1) One FREE sticker
Instructions: Pre-soak OEM bump stop with penetrating oil to make removal easier. Pay careful attention to the threaded stud that mounts the bump stop to the frame and the threads of the stud that are exposed beyond the nut. Step 1: Following vehicle manufacturer recommendations, use a properly rated jack. Raise the front of the vehicle, and support the frame rails with jack stands. Remove front wheels from truck. Be sure to use jack stands! Step 2: Remove OEM bump stops with groove-lock pliers, pipe wrench, or similar. The bump stop is located on the rear of the lower control arm on the driver and passenger sides of the vehicle. Be careful not to break the threaded stud on the OEM bump stop during removal. Step 3: Use a scraper or wire brush and clean any mud/ debris from the frame. Step 4: Insert provided flange bolt into the new front DuroBumps and coat the threads with the provided single-use medium (blue) thread locker. Step 5: Install the DuroBumps at the rear of the lower control arm, using a 14mm deep socket. Tighten the bolt and nut until snug (12 – 15 ft. lbs.). Do not over tighten. The OEM bump stop that is located at the front of the lower control arm will remain in place. Step 6: Reinstall wheels and lower vehicle back to the ground. Be sure to tighten lug nuts to vehicle manufacturer’s recommendations. Please note: DuroBumps are intended to be installed at the rear of the lower control arm only.
