Toyota U-Bolt Flip Kit 05-23 Tacoma, 00-06 Tundra / 8.85 Inch length U-Bolts - DBFK01-885
Toyota Tacoma U-Bolt Flip Kit for 2nd Gen & 3rd Gen Tacoma / 8.85 Inch Length U-Bolt
Introducing the DuroBumps U-bolt Flip Kit, custom-made for 2nd and 3rd Gen Toyota Tacoma trucks. Made in the USA, this kit eliminates lightweight OEM U-bolts and flimsy U-bolt mounting plates. Boasting top-quality, 9/16” diameter U-bolts and a heavy-duty 3/8” steel flip-plate, it stands out as the most robust and durable choice on the market.
Factory-equipped Toyota trucks come with a less-than-ideal U-bolt configuration. With U-bolt threads under the rear axle facing the ground, under-axle clearance decreases. This limitation hampers off-road performance and raises the likelihood of getting snagged on rocks.
DuroBumps addresses this problem by directing the U-bolt threads upward. Our sturdy 9/16” steel U-bolts securely wrap the axle tube, positioning threads upward and reducing the risk of getting stuck or damaged. Additionally, the U-bolts attach the rear axle to the leaf pack using a 3/8” thick steel plate, offering extra protection.
We powder coat our flip plates Black, and include U-bolts that are clear zinc coated and powder coated black. Moreover, all Tacoma rear U-bolt flip kit options install effortlessly with our included high grade extra thick flat washers and tall nuts Gold zinc coated..
Upgrade your Toyota Tacoma suspension with the DuroBumps U-bolt Flip Kit today and experience the Durobumps Difference! Note: For off-road use only. Do not use spacers with any of Durobumps product line. By installing these aftermarket bump stops, the user assumes all risk and liability. DuroBumps are not designed for towing applications. For more information, visit https://durobumps.com/terms-of-use/. The seller will not be held liable for any damage or loss associated with the installation or use of this product for any reason.
Toyota Tacoma U-bolt Flip Kit Features and Benefits:
- Improved under-axle clearance – Significantly enhance clearance and U-bolt durability by reversing the factory assembly with DuroBumps U-bolt Flip Kits.
- Solid 9/16” U-bolt diameter – Guarantee a strong, secure fit and outstanding corrosion resistance, perfect for off-road excursions.
- Rugged 3/8? steel mounting plate – Our black powder-coated flip-plates provide top-notch durability with 30° bent ends and powder coated Black.
- Simple installation – Install the DuroBumps Flip Kit with ease using the supplied hardware and basic tools.
2 – U-bolt Flip plates. Powder Coated Black.
4 – U-bolts. Clear Zinc Coated. Powder Coated Black.
4 – High Grade Extra Thick Washers Gold Zinc coated.
4 – High Grade Tall Nuts Gold Zinc coated.
1 – Installation instructions.
1 – Free Durobumps Sticker.
Instructions: Step 1: Following vehicle manufacturer recommendations, use a properly rated jack. Lift the rear of the truck with floor jack and support the frame rails with jack stands. Lower the truck so the weight is resting fully on the jack stands. Be sure to use jack stands! Step 2: Work on one side at a time. Support the axle using a floor jack. Loosen and remove the nuts on the OEM square shaped U-bolts using a 19 mm deep socket wrench. Remove the two OEM U-bolts and OEM mounting plate. Step 3: Use a scraper or wire brush to clean any mud/debris from the top of the leaf pack. Step 4: Install DuroBumps flip plate on top of the leaf pack, with the leaf pack detent bolt centered with the flip plate. Install the new U-bolts with the threaded end facing upward toward the bed of the truck. Use the provided washer and tall nut to fasten the U-bolts to the flip plate. Tighten nuts until snug. The U-bolts can be tightened evenly and torqued to 93 ft. lbs. Step 5: Repeat steps 2 – 4 on the other side. Step 6: Reinstall wheels and lower vehicle back to the ground. Torque lug nuts to factory specifications. Note: All U-bolts stretch after installation. It is very important to recheck the torque of your U-bolt nuts after driving 250, 500, and 1000 miles after initial install. Again, you need to check your U-bolts’ torque to verify that they are 93 ft. lbs. after 250, 500, and 1000 miles after initial install. All U-bolts stretch after being installed and need to be re-torqued.
We Also Recommend
Durobumps Premium Rear Off Road 3-Inch extended Bump Stops for 90-96 Land Cruiser, 96-97 Lexus LX450 (5.25 inch Tall) 3-Inch Lift Required - DBRLC525
Durobumps Premium 2-Inch Extended Rear Bump Stops for 90-07 Land Cruiser, 96-07 Lexus LX, 01-07 Sequoia (4.25 inch Tall) 2 Inch Lift Required - DBRLC425
Durobumps Toyota Aftermarket Bump Stops for 90-07 Land Cruiser, 96-07 Lexus LX, 01-07 Sequoia (3.5 inch Tall) No Lift Required - DBRLC35
Durobumps 3-Inch Extended Rear Bump Stops for 03-23 4Runner, 07-14 FJ Cruiser, 03-09 GX470, 10-23 GX460 (5.25 inch Tall) 3 Inch Lift Required - DBR525LT